Exploits > SCPH-18K to SCPH-90K 2.20 BOOTROM and PSX > Sony/Other Memcard

Great! Here is your LoadBOOTer download for Sony/other memcards:

Step 1 - Download KELFBinder

Download KELFBinder

Step 2 - KELFBinder Tutorial

KELFBinder/OpenTuna Installer Tutorial PLEASE READ!!

KELFBinder MagicGate test fails, and/or my bootrom is 2.30 or later!

If the MagicGate test fails or your bootrom is 2.30 or later, you need to use OpenTuna. You can still run KELFBinder, but chose to install OpenTuna via the KELFBinder Installer or OpenTuna Installers found here.

Using the wrong OpenTuna version:

Using the incorrect OpenTuna version for your memory card may corrupt the file system. If you are unsure, run ROM Version Check to see your BOOTROM info version to help choose the correct OpenTuna exploit! This is included in the KELFBinder download labeled in KELFBinder-UMCS/INSTALL/CORE/BACKDOOR.ELF

Otherwise if installing for another console use these below:

PSU Paste Tutorial

OpenTuna 1.10-1.60 SCPH-18XXX to 3XXXX

OpenTuna 1.70 SCPH-50XXX (some)

OpenTuna 1.90-2.50 SCPH-50xxx (some) / 7xxxx / 9xxxx and KDL

These 2 folders BOOT and SYS-CONF are needed to complete a manual OpenTuna installation

BOOT, BOOT MMCE or BOOT MX4SIO

SYS-CONF

And to complete the install to align with the configs in SYS-CONF

OSDMenu

NHDDL (selct nightly!)

OPL 1.2.0 Beta 2241

Neutrino (NOT a PSU. Unzip to root of USB and MC Paste via wLE)

DKWDRV

Restart

PowerOff

Step 5 - Reboot

Reboot your PS2. You may need to remove the exploit or memory card you used to create this card. See the screenshots below:

Example of what you will encounter:

PS2BBL_Pic — **Step 1:** Press controller button here for hotkeys or wait for it to autoboot what you have set for LK_AUTO_E? in `mc?:/SYS-CONF/PS2BBL.INI`

OSDMenu_Pic — **Step 2:** OSDMenu which is hacked OSDSYS. Edit `mc?:/SYS-CONF/OSDMENU.CNF` as desired. Simply remove `#` per entry to show items that are hidden.

protopwn-browser_pic — **TIP:** You can launch apps from here!

Step 6 - Configure PS2BBL Extended and Hacked OSDSYS

R3Configurator
Download R3Configurator and place on device of choice (usb, mx4sio, mmce) at device:/APPS/
You should end up with device:/APPS/SYS_R3CONFIGURATOR/r3configurator.elf
Plug the device that you copied R3Configurator to into your PS2
Reboot your PS2, and hold down R3 on controller to boot R3Configurator
NON PSX-DESR consoles only! The app can also be ran from your hacked OSDSYS by scrolling down to R3Configurator if you failed to press the button in time.

R3Configurator Options

PS2BBLE_pic — **Step 1:** Press `R3` to launch `OSDMenu Configurator`

OSDMenu-step1 — **Optional:** May also launch from hacked OSDSYS

OSDMenu-step2 — **Step 2:** Select `PS2BBL/PSXBBL as needed to configure Launch Keys and AutoBoot`

OSDMenu-step3 — **Step 3:** Select `Memory Card 1` PS2BBL/PSXBBL has a search order for it's config files...

OSDMenu-step4 — **Step 4:** Select `mc0:/SYS-CONF//PS2BBL.INI`

OSDMenu-step5 — **Step 5:** Now go explore and customize PS2BBL/PSXBBL as desired!

OSDMenu-step6 — **Step 6:** Once done go back to main page and select your hacked OSDSYS of choice. OSDMenu is default for us and superior to FMCB.

OSDMenu-step7 — **Step 7:** Select `OSDMENU.CNF`. OSDGSM.CNF is to force video modes for disc usage.

OSDMenu-step8 — **Step 8:** Now go explore and customize OSDMenu as desired!

Please reference the documentation for PS2BBL Extended and OSDMenu.

Step 8 - Configure Other Apps

Apps such as OPL and NHDDL will need further configuration and or setup, such as puting your ISO's and art assets on. Follow each apps tutorial for such according to their webpage. Each developer is responsible for their own tutorials. OPL documentation is sadly lacking, NHDDL's is great. For NHDDL we recommend to launch via arguments as both PS2BBL Extended and OSDMenu support this. It is THE FASTEST way to load your ISO list.

Boot Process:

---
config:
  theme: mc
  layout: elk.forced
  look: classic
---
graph LR
    A(["POWER ON"]) L_A_B_0@-- "BOOTROM 1.00-2.20<br>Excluding DTL-H3000*" --> B["SIGNED OSDSYS UPDATE<br>B?EXEC-SYSTEM<br>(LoadBOOTer)<br>Chainload:<br>mc?:/BOOT/BOOT.ELF"]
    A L_A_n1_0@-- "BOOTROM 2.30, 2.50<br>DEV 1 Modchips<br>Memory Cards w/o MagicGate" --> n1["OPENTUNA/DEV 1 CHIPS<br>Chainload:<br>mc?:/BOOT/BOOT.ELF<br>"]
    n5@{ label: "<pre style=\"font-family:\"><code style=\"font-family:\">mc?:/SYS-CONF/PS2BBL.INI</code></pre>" } --> n6["AutoLaunch<br>or<br>Hotkeys"]
    n6 -- AutoLaunch --> n7@{ label: "<span style=\"--tw-scale-x:\"><b><span style=\"--tw-scale-x:\">PS2BBL.INI AUTOLAUNCH</span><br style=\"--tw-scale-x:\"></b></span><br style=\"--tw-scale-x:\"><span style=\"background-color:\">1: EMPTY</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"background-color:\">2: EMPTY</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"--tw-scale-x:\">3: SYS_OSDMENU</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"--tw-scale-x:\">4: SYS_FMCBD-1966</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"--tw-scale-x:\">5: SYS_FMCBD-1965</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"--tw-scale-x:\">6: SYS_FMCBD-1955<br style=\"--tw-scale-x:\"></span><br style=\"--tw-scale-x:\"><span style=\"background-color:\">7: SYS_FMCBD-18C</span><br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\"><span style=\"--tw-scale-x:\">8: BOOT/BOOT2.ELF (wLE ISR exFAT)<br style=\"--tw-scale-x:\"><br style=\"--tw-scale-x:\">9: OSDSYS</span>" }
    B L_B_n8_0@-- <br> --> n8["mc?:/BOOT/BOOT.ELF<br>(PS2BBL)<br>./CONFIG.INI<br>DOES NOT EXIST!"]
    n1 L_n1_n8_0@-- <br> --> n8
    n8 L_n8_n5_0@-- Next config<br>search<br>pattern --> n5
    n10@{ label: "<pre style=\"--tw-scale-x:\"><code style=\"--tw-scale-x:\">mc?:/SYS-CONF/PSXBBL.INI</code></pre>" } --> n6
    n8 L_n8_n10_0@-- "PSX DESR-XXXX" --> n10
    A L_A_n11_0@-- "SCPH-10000<br>SCPH-15000<br>DTL-H10000(S)" --> n11["OSDSYS UPDATE<br>BIEXEC-SYSTEM<br>(ProtoPwn)<br>Chainload:<br>mc?:/BOOT/BOOT.ELF"]
    n11 L_n11_n8_0@--> n8

    B@{ shape: hex}
    n1@{ shape: event}
    n5@{ shape: lin-proc}
    n6@{ shape: diam}
    n7@{ shape: lin-proc}
    n8@{ shape: delay}
    n10@{ shape: lin-proc}
    n11@{ shape: event}
    classDef Ash stroke-width:1px, stroke-dasharray:none, stroke:#999999, fill:#EEEEEE, color:#000000
    classDef Sky stroke-width:1px, stroke-dasharray:none, stroke:#374D7C, fill:#E2EBFF, color:#374D7C
    style A fill:#00C853
    style B color:#FFFFFF,fill:#AA00FF
    style n1 color:#00C853,fill:transparent
    style n5 fill:#FFF9C4,color:#00C853
    style n6 fill:#00C853,color:#000000
    style n7 fill:#FFF9C4
    style n8 fill:#FF6D00
    style n10 fill:#FFF9C4,color:#00C853
    style n11 color:#00C853,fill:transparent
    linkStyle 0 stroke:#AA00FF,fill:none
    linkStyle 1 stroke:#00C853,fill:none
    linkStyle 2 stroke:#00C853,fill:none
    linkStyle 3 stroke:#00C853,fill:none
    linkStyle 4 stroke:#FF6D00,fill:none
    linkStyle 5 stroke:#FF6D00,fill:none
    linkStyle 6 stroke:#00C853,fill:none
    linkStyle 7 stroke:#00C853,fill:none
    linkStyle 8 stroke:#00C853
    linkStyle 9 stroke:#00C853,fill:none
    linkStyle 10 stroke:#FF6D00,fill:none

    L_A_B_0@{ animation: slow } 
    L_A_n1_0@{ animation: slow } 
    L_B_n8_0@{ animation: slow } 
    L_n1_n8_0@{ animation: slow } 
    L_n8_n5_0@{ animation: slow } 
    L_n8_n10_0@{ animation: slow } 
    L_A_n11_0@{ animation: slow } 
    L_n11_n8_0@{ animation: slow }

Landing on your hacked OSDSYS of choice:

PS2BBL.INI and PSXBBL.INI are setup so that minimal config changes are needed if at all. To land on your hacked OSDSYS of choice, install the OSDMenu/ FMCB Version XXXX as needed. If multiple are installed (such as the MMCE AIO downloads), you can delete in order from first to last to land on the desired app. This is especially useful for modchip users as they may not play well or at all with some or all of the OSDSYS such as I believe Mars Pro. In that case, just delete all of the SYS_OSDMENU and SYS_FMCB-XXXX folders. Modchip users may need to disable chip to do so.

PS2BBL Hotkeys:

Emergency Mode

If something breaks on your setup but PS2BBL still boots, just hold R1+START. It will trigger emergency mode where PS2BBL will try to boot RESCUE.ELF from USB device Root on an endless loop. Recommended to rename wLE ISR Exfat to RESCUE.ELF